For Quote or Emergency Service

763.428.8630

Main menu

If the GFCI receptacle trips, all of the receptacles on that circuit will not work. Please unplug all devices and reset the GFCI circuit at the receptacle (NOT at the main panel). If the GFCI receptacle fails to reset and trips after several attempts, there may be a more serious problem. Please contact us to discuss the issue in more detail.

 

The red button is the re-set button that you depress to reactivate the outlet or outlets in the event of deactivation resulting from a fault (trip) or from a test (see below).

The black button is a test button and, when pressed, should deactivate the outlet and any other outlet fed from it. This deactivation indicates a properly functioning device. After testing, press the red button to re-set the circuit.

Smart Home Technology Gives a Disabled Client Full Control Again

ELAN, alongside J. Becher & Assoc.'s; give a quadriplegic man full control...Read More >

Oak Grove Home Gets 4K Smart TV's and Home Audio Installed in Custom Cabinets

A custom home entertainment and technology project in Oak Grove Minnesota...Read More >

Martin Professional Building - Electrical & Low Voltage Systems

We are proud to announce that Martin & Wagner Law and Martin Professional...Read More >

emergency iconEMERGENCY SERVICE: Call 763.428.8630 for any electrical or security emergency. 365 days a year. 24 hours a day. We’re here when you need us.

emergency iconSECURITY: Add a security system or monitoring to your home or business.

Employee Connect

J. Becher & Assoc., Inc.
20610 Commerce Blvd.
Rogers, MN 55374

For Quote or Emergency Service

763.428.8630