If your flood lights do not work, please check the bulbs. We are not responsible for the warranty of any lamps and there will be a service charge for the changing any lamps if no other problem exists. Motion sensors operate the lights when motion is detected and turn off a short time after motion detection has stopped. This time can be adjusted from 5 seconds to 10 minutes. Please note that animals (including birds) and falling leaves can activate your motion sensors.
To turn lights off that are controlled by a motion sensor, flip the switch “OFF”. For automatic operation, turn the switch “ON” and allow the motion sensor to run through a one minute test period. To turn lights on outside of motion sensor detection, flip the switch into the “OFF” position and then back “ON” within 1 second. This will override the motion sensor and turn the lights on manually. To resume automatic operation, flip the switch “OFF” for more than 5 seconds and then back “ON” again.